Key Features:
1️⃣ Fast and Accurate Testing: The BST100 features an upgraded intelligent chip, ensuring high accuracy and rapid testing. Results are displayed within 2 seconds, allowing you to quickly assess your battery’s health.
2️⃣ Comprehensive Analysis: This multifunctional tester evaluates various aspects of your 12V battery:
- Battery Capacity: Measures the battery’s overall capacity in Cold Cranking Amps (CCA) and other industry standards.
- Internal Resistance: Provides the internal resistance value (Ohm) for a deeper understanding of battery health.
- Battery Life Percentage: Displays the remaining life of your battery.
- Cranking Test: Assesses the battery’s ability to start your vehicle.
- Charging Test: Evaluates the charging system’s performance.
3️⃣ Wide Compatibility: The BST100 supports various battery types, including:
- Ordinary lead-acid batteries
- AGM flat plate batteries
- AGM spiral batteries
- Gel batteries
4️⃣ User-Friendly Design:
- In-Vehicle and Out-of-Vehicle Testing: Test batteries both inside and outside your vehicle.
- Simple Operation: Connect the tester’s clamps to the battery terminals, select the menu, and analyze the results.
- Safe and Protective: Ensures safe testing without risking damage to your equipment.
5️⃣ Multiple Language Support: The BST100 provides test results in several languages, including English, French, German, Russian, Spanish, Italian, and Portuguese.
6️⃣ Lifetime Free Upgrades: Enjoy perpetual updates to keep your tester cutting-edge and accurate.
Specifications
WHAT YOU GET
📦⬇️📦
FQA 1. What is the measurement principle of this tester?
The battery will gradually be aged with an increase in time. The main reason is that it can no longer generate some effectively chemical reaction because of the aging of the surface of the battery plate. International Electric and Electronic Engineer Association(IEEE) formally looks the Conductivity Test as one of the standards of checking lead-acid storage batteries. It points out from IEEE standard 1118-1996 that: Conductivity Test is used to test AC current generated by putting the known frequency and amplitude AC signal to both sides of the battery. AC conductivity value is the ratio of AC current signal which keeps the same phase with AC voltage and the AC voltage. This tester is designed from this principle actually.
FQA 2. Is the result affected by the installation of negative current for the vehicle?
All the negative currency will affect the result. Therefore please remove the negative currency before checking, to achieve the accurate data.
FQA 3. Can this tester predict when the battery goes down?
The internal resistance of the sealed lead-acid battery is complicated. It is generated by ohm internal resistance, concentration polarization internal resistance, chemical reactions internal resistance and interference effect caused by double capacitance’s charging. The ingredient of internal resistance and its relative content will change with different test methods and different test moments, which can lead to different tested values of the internal resistance. And there is no strict relationship between internal resistance (or conductance) and capacitance of the sealed lead-acid battery. So it is impossible to predict the life of battery according to a single battery’s internal resistance. But it can be predicted the life of the battery will be over soon from the sudden increase of its internal resistance and decrease of its conductance.
FQA 4.Is the CCA value tested by this tester correct?
CCA is considered as a control standard with the produce of the battery. According to the accumulated records, the tested value of a new battery is 10-15% higher than the standard value, and along with consuming the battery, the value is getting close to standard, even lower afterward.
FQA 5.What is the difference between the method used by this tester and the load test method?
The load test method: According to the physical formula R=V/1, test equipment forcibly makes the high permanent DC ( presently 40-80A large current is available ) go through the battery shortly ( about 2-3 seconds). And then the tested voltage of the battery can be used to figure out the internal resistance by the formula.